BONOMI INDUSTRIES ist ein weltweiter Anbieter von hochwertigen Kugelhähne und Stellantrieben. Wir produzieren Niederdruck-Kugelventile und Stellantriebe für industriellen Einsatz und sind stolz darauf, mit den besten Industrieunternehmen zusammenzuarbeiten, welche unsere Produkte für ihre Effizienz und Zuverlässigkeit schätzen.
Unsere Familie Bonomi unterstützt das gesunde Wachstum von BONOMI INDUSTRIES mit Kraft und Leidenschaft. Mit über 60 Jahren Tätigkeit steuern wir unserem nächsten Fünfjahres-Geschäftsplan entgegen, der Umsatzsteigerung, neue Großinvestitionen, Innovation und, am allerwichtigsten, eine neue Herangehensweise an Kunden, Mitarbeiter und Lieferanten einschließt. Wir sind Menschen unter Menschen.
Unser Gründer, Silvio Bonomi, hat uns beigebracht, die Qualität an erste Stelle zu setzen, und das tun wir mit großem Einsatz bei jeder Tätigkeit in unserem Beruf.
MCE ist das weltweite Schaufenster für Unternehmen aus den Bereichen SHK, erneuerbare […]
12 – 54 mm solder ends, for insulation, dezincification-resistant
Several governmental authorities recommend use of special alloys for valves handling water in areas where there is a problem of dezincification. RuB DZR valves are designed to meet such requirements.
Through the use of new technology these valves retain the reliability and competitiveness of brass, but are comparable to bronze in corrosion resistance.
Be kind with yourself, make sure the valve that brings you pure fresh water is an RuB DZR valve.
3/4″ for flat gasket
Legionella is a bacterium that lives and proliferates in natural and artificial aquatic environments at temperatures ranging between 5.7°C and 55°C and standing up to acidic and alkaline environments.
New s.84AW is approved for use with drinking water; the specific ball design avoids water stagnation and the spread of bacteria in the system.
1/4″ – 2″ EN 10226-1
Access to fluid systems in public places could potentially convert into costs and safety problems. In order to avoid unattended valves being left open with negative economic or environmental consequences, RuB developed the automatic self-closing valve.
The valve can be opened normally by rotating the handle 90° and when the user releases the handle, the valve shuts off automatically. Best solution for service stations, trucks, public areas, gardens. The same features are also useful in industrial applications, where a valve must not be left open unattended.
1/4″ – 2″ with patented locking handle
Featuring patented tamper-proof lockable handle that has no equal in the market.
RuB s.93 range exhausts automatically and continuously downstream air pressure as soon as turned in the closed position.
Valve is lockable in the closed position only, according to Part. 1910.147 safety OSHA (USA) requirements allowing safe maintenance of the air-supplied equipment; when valve is open, one simple 90° turn of the handle shuts flow immediately.
We care for those you care for.
1/2″ – 2″ EN 10226-1, ISO 5211, pure PTFE seats, DIN 16722 M3
More and more automation is required at all levels in our society and the k.64 RuB range is the answer to all needs for reliable actuated ball valve.
The line has successfully passed 100,000 cycle life tests and is available in a variety of standard and customized configurations some with special seat design to compensate for wear.
12 – 54 mm compression ends, for insulation, dezincification-resistant
Several governmental authorities recommend use of special alloys for valves handling water in areas where there is a problem of dezincification.
RuB DZR valves are designed to meet such requirements. Through the use of new technology these valves retain the reliability and competitiveness of brass, but are comparable to bronze in corrosion resistance.
Be kind with yourself, make sure the valve that brings you pure fresh water is an RuB DZR valve.
3/8″ – 2″ ISO 228, for insulation, dezincification-resistant
Several governmental authorities recommend use of special alloys for valves handling water in areas where there is a problem of dezincification. RuB DZR valves are designed to meet such requirements.
Through the use of new technology these valves retain the reliability and competitiveness of brass, but are comparable to bronze in corrosion resistance.
Be kind with yourself, make sure the valve that brings you pure fresh water is an RuB DZR valve.
1/4″ – 2″, EN 10226-1
Legionella is a bacterium that lives and proliferates in natural and artificial aquatic environments at temperatures ranging between 5.7°C and 55°C and standing up to acidic and alkaline environments. New s.84W is approved for use with drinking water; the specific ball design avoids water stagnation and the spread of bacteria in the system.
1/2″ – 4″ brass trim, ISO 5211
More and more automation is required at all levels in our society and the s.64 RuB range is the answer to all needs for reliable actuated ball valve.
It features special seat design to automatically compensate for wear and it has successfully passed 100,000 cycle* life tests.
You can purchase the valve alone or with the RuB actuator already mounted.
*All sizes up to 2″ included
1/2″ – 2″, SS trim, ISO 5211
More and more automation is required at all levels in our society and the s.64 RuB range is the answer to all needs for reliable actuated ball valve.
It features special seat design to automatically compensate for wear and it has successfully passed 100,000 cycle life tests.
You can purchase the valve alone or with RuB actuator already mounted.
1/2″ – 4″ EN 10226-1, dezincification-resistant
Several governmental authorities recommend use of special alloys for valves handling water in areas where there is a problem of dezincification. RuB DZR valves are designed to meet such requirements.
Through the use of new technology these valves retain the reliability and competitiveness of brass, but are comparable to bronze in corrosion resistance.
Be kind with yourself, make sure the valve that brings you pure fresh water is an RuB DZR valve.
1/4″ – 2″ ISO 228, dezincification-resistant
Several governmental authorities recommend use of special alloys for valves handling water in areas where there is a problem of dezincification. RuB DZR valves are designed to meet such requirements.
Through the use of new technology these valves retain the reliability and competitiveness of brass, but are comparable to bronze in corrosion resistance.
Be kind with yourself, make sure the valve that brings you pure fresh water is an RuB DZR valve.
full port 1/2” – 1”
hot forged brass ball valve
The RuB s.7200 is the right choice for fluid diversion and is designed with robust maintenance-free components ensuring ease of operation and safety. With a simple 90° turn, you can divert flow from one downstream outlet to the other. It combines traditional manual operation with modern automation.
Our s.72 multi-port valves can reduce the number of valves required in piping systems and can significantly lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying automation.
full port 1/2” – 1”
hot forged brass ball valve
The RuB S.7200L is the right choice for fluid diversion and is designed with robust maintenance-free components ensuring ease of operation and safety. With a simple 90° turn of the handle, you can divert flow from one downstream outlet to the other. It combines traditional manual operation with modern automation.
It is also very easy to convert from its sturdy lever handle to ISO 5211 actuator flange assembly.
The valve can be purchased separately, with handle or with a RuB actuator already mounted.
15 – 54 mm, dezincification-resistant
Time is of essence and valve technology has progressed to save time and ease on-site installation.
RuB s.24 DZR with press ends combines first class features of our s.24 which have been optimized through years of field experience and innovative press fittings which can be pressed with all pressing jaws and tools provided for metal connections type M and V.
Be kind with yourself, make sure the valve that brings you pure fresh water is an RuB DZR ball valve. Press-end couplings are made of bronze, a material well known for its suitability to the press operation. Each coupling assembly is seal tested at the plant.
full port 1/2” – 1”
hot forged brass ball valve
The RuB S.7241 is the right choice for fluid diversion and is designed with robust maintenance-free components ensuring ease of operation and safety. With a simple 90° turn, you can divert flow from one downstream outlet to the other. It combines traditional manual operation with modern automation.
Our s.72 multi-port valves can reduce the number of valves required in piping systems and can significantly lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying automation.
1″ – 2″, SS trim, ISO 5211, low torque
More and more automation is required at all levels in our society and the s.64 RuB range is the answer to all needs for reliable actuated ball valve.
It features special seat design to automatically compensate for wear and it has successfully passed 100,000 cycle life tests.
You can purchase the valve alone or with RuB actuator already mounted.
full port 1/2” – 1”
hot forged brass ball valve
The RuB S.7241L is the right choice for fluid diversion and is designed with robust maintenance-free components ensuring ease of operation and safety. With a simple 90° turn of the handle, you can divert flow from one downstream outlet to the other. It combines traditional manual operation with modern automation.
It is also very easy to convert from its sturdy lever handle to ISO 5211 actuator flange assembly.
The valve can be purchased separately, with handle or with a RuB actuator already mounted.
1/2″ – 1″ EN 10226-1, ISO 5211
In many situations a single multi-port valve can replace several 2-way valves to reduce cost, simplify automation and conserve space. The s.7300 series have a ball seal at every port, and offer a wide variety of possible flow configurations. Positive shutoff can be achieved at any of the exiting ports. By specifying the appropriate ball port configuration, the T port design allows flow direction to be adjusted for virtually any situation and is ideal for mixing applications.
Our s.73 multi-port valves can reduce the number of valves required in piping systems and can significantly lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying automation.
1/2″ – 1″ EN 10226-1
In many situations a single multi-port valve can replace several 2-way valves to reduce cost, simplify automation and conserve space. The s.7300L series have a ball seal at every port, and offer a wide variety of possible flow configurations. Positive shutoff can be achieved at any of the exiting ports. By specifying the appropriate ball port configuration, the T-port design allows flow direction to be adjusted for virtually any situation and is ideal for mixing applications.
Our s73 multi-port valves can reduce the number of valves required in piping systems and can significantly lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying automation.
1/2″ – 1″ ISO 5211
In many situations a single multi-port valve can replace several 2-way valves to reduce cost, simplify automation and conserve space. The s.7341 series have a ball seal at every port, and offer a wide variety of possible flow configurations. Positive shutoff can be achieved at any of the exiting ports. By specifying the appropriate ball port configuration, the T port design allows flow direction to be adjusted for virtually any situation and is ideal for mixing applications.
Our s.73 multi-port valves can reduce the number of valves required in piping systems and can significantly lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying automation.
1/2” – 1”
In many situations a single multi-port valve can replace several 2-way valves to reduce cost, simplify automation and conserve space. The s.7341L series have a ball seal at every port, and offer a wide variety of possible flow configurations. Positive shutoff can be achieved at any of the exiting ports. By specifying the appropriate ball port configuration, the T port design allows flow direction to be adjusted for virtually any situation and is ideal for mixing applications.
Our s73 multi-port valves can reduce the number of valves required in piping systems and can significantly lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying automation.
1/4″ ISO 228, cap & strap
Many HVAC applications require a blowdown valve to drain water from the strainer.
RuB ’s new s.55 cap & strap valve is designed with a full port for maximum flow.
Because of the O-ring stem seal design, no maintenance is ever required.
3/4″ thread gives the possibility to easily fit a hose holder available as option, for the connection of a waste water collection pipe.
12 – 54 mm compression ends, dezincification-resistant
Several governmental authorities recommend use of special alloys for valves handling water in areas where there is a problem of dezincification.
RuB DZR valves are designed to meet such requirements. Through the use of new technology these valves retain the reliability and competitiveness of brass, but are comparable to bronze in corrosion resistance.
Be kind with yourself, make sure the valve that brings you pure fresh water is an RuB DZR valve.
1/4″ – 2″ EN 10226-1 with patented locking handle
Featuring patented tamper- proof lockable handle that has no equal in the market.
RuB s.93 range exhausts automatically and continuously downstream air pressure as soon as turned in the closed position.
Valve is lockable in the closed position only, according to Part. 1910.147 safety OSHA (USA) requirements allowing safe maintenance of the air-supplied equipment; when valve is open, one simple 90° turn of the handle shuts flow immediately.
We care for those you care for.
1/4″ NPT needle valve
The new RuB needle valve proves the state of the art of RuB innovation capabilities.
This inexpensive valve is designed to ease flow regulation in all applications where drops are counted like gold!
The flow chart on reverse compares the RuB linear curve performance with competition and it is obvious how by counting the number of turns, the operator can easily adjust flow.
All details of the RuB needle valve have been optimized to provide utmost performance, reliability and no maintenance.
Another „install and forget“ RuB product.
1/4″ – 2″ heavy duty – DIN 16722 M3, EN 10226-1
Access to fluid systems in public places could potentially convert into costs and safety problems. In order to avoid unattended valves being left open with negative economic or environmental consequences, RuB developed the automatic self-closing valve.
The valve can be opened normally by rotating the handle 90° and when the user releases the handle, the valve shuts off automatically.
Best solution for service stations, trucks, public areas, gardens.
The same features are also useful in industrial applications, where a valve must not be left open unattended.
motor-oil compact drain ball valve
Specifically responding to a need in the automotive application, s.17 is fitted under the oil sum to ease drainage operations, and furthermore granting a most reliable tightness thanks to its special automatic locking device, even under severe conditions of vibration stress.
Frozen drain plug and stripped threads are eliminated, no more contact with hot oil, no messy hands or cloths and reduced oil changing time.
PATENTED PENDING
motor-oil drain ball valve
Specifically responding to a need in the automotive application, s.17 is fitted under the oil sum to ease drainage operations, and furthermore granting a most reliable tightness thanks to its special automatic locking device, even under severe conditions of vibration stress.
Frozen drain plug and stripped threads are eliminated, no more contact with hot oil, no messy hands or cloths and reduced oil changing time.
1/4″ – 2″
Access to fluid systems in public places could potentially convert into costs and safety problems.
In order to avoid unattended valves being left open with negative economic of environmental consequences, RuB developed the automatic self-closing valve.
The valve can be opened normally by rotating the handle 90° and when the user releases the handle, the valve shuts off automatically.
Best solution for service stations, trucks, public areas, gardens. The same features are also useful in industrial applications, where a valve must not be left open unattended.