s.161G

Informationenanfrage

1/2″ – 2″
hot forged brass ball valve

Technische Daten
Quality
  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Handle stops on body to avoid stresses at stem
  • Chrome plated brass ball for longer life with rinse hole
Body
  • Hot forged sand blasted, external nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications
Stem
  • Blowout-proof nickel plated brass stem
  • Two FPM O-Rings at the stem for maximum safety
Sealing
  • Pure PTFE self-lubricating seats with flexible-lip design
Upon request
  • AISI 316 stainless steel ball
  • Glass filled PTFE seals
  • Custom design
Approved by or in compliance with
  • GOST-R (Russia)
  • Hygiene and epidemic center in Moscow city (Russia)
  • RoHS Compliant (EU)

 

NOTE: approvals apply to specific configurations/sizes only.

Threads
  • EN 10226-1 parallel female by female threads
Flow
  • Nominal port for compact design
Handle
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Handle removable with valve in service
Working pressure & temperature

S.161G ball valves can be used with flammable gases (methane, propane, etc.) at 5 Bar maximum pressure rating and ambient temperature between -20°C and +60°C.

S.161G do not comply with EN331 and cannot be used for gas applications within the European Union.

  • General Use: 30 Bar (450 PSI) non-shock cold working pressure and -20°C/+170°C temperature
  • WARNING: freezing of the fluid in the installation may severely damage the valve
Options
  • Taper male by parallel female threads
  • T-handle
  • Stem extension
  • Oval lockable handle
  • AISI 430 stainless steel handle
  • Patented locking device
  • Stubby handle
  • BONOMI INDUSTRIES memory stop designed to be installed with our stubby handle

1.1/4″ – 2″ hollow ball

Part descriptionQ.tyMaterial
1Nickel plated body (external treatment)1CW617N
2Seat2PTFE
3Chrome plated ball with rinse hole1CW617N
4Nickel plated end-cap (external treatment)1CW617N
5Nickel plated stem O-ring design1CW617N
6Geomet® nut1CB4FF
7O-Ring2FPM
8Yellow PVC coated Geomet® steel handle1DD11

DN shows actual flow diameter.

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES161G - 3992