Absolutely! The company invests in our future, by paying attention to main trading issues, techniques for continuous improvement and prudent financial management. The dividends are constantly reinvested in new technology not only in production but for each department. The use of third party financing is extremely limited. The company has a large stocks around the world, which helps to manage the market oscillations.
BONOMI INDUSTRIES offers its customers a 100% made in Italy product. The production plant is in the province of Brescia on the main road between Brescia and Desenzano, in a town called “Ciliverghe di Mazzano”. There has been the necessity to open two stock houses located in USA and in Japan to better serve these two markets.
All our valves are submitted to strict project validation tests, test lines at each production stage, controls on material acceptance and each valves is submitted to an automatic dual seal test at 100%. They are approved for water and gas applications by different certification boards all over the world:
From Iceland to New Zealand, our valves are known as synonym of quality!
In addition, the company is ISO 9001 certified by Lloyd’s Register Quality Assurance in accordance to the PED regulations for pressurized vessels and regulations relating to safety and environment.
On average, in our plant we make 400.000 inspections/tests/verifications every day.
RuB products are warranted for two years.
The regulation DIN 3357 part 4 indicates that full port valves are those whose effective diameter is not less than 96% of the nominal port: for example, a valve with 50mm port (2”) is defined full port if its diameter is not less than 48mm. The valves on which we indicate 100% full port have a ball diameter perfectly identical to the nominal diameter of the pipe, so for a 2” valve, the effective port is 50mm.
BONOMI INDUSTRIES is a specialist of brass manufacturing. All our valves components and materials are tested according to very strict quality standards. Brass is in compliance with EN 12165 and EN 12164 available also in various alloys depending on application and destination: CW617N, CW602N, CW510L.
For CW617N, BONOMI INDUSTRIES specifies that Pb contents should be lower than 2,2% for many years. This requirement will soon become a European regulation.
CW602N is a dezincification resistant brass alloy for hard water use.
CW510L is a brass whose Pb content is less than 0,25% and that is commonly called Lead-Free due to these percentage, the Pb content can be assimilated to impurity.
The ball joints are in virgin PTFE, pure or charged with various contents according to needs.
The stem sealing is achieved thanks to a dual O-ring in FPM (Viton® is a registered brand Dupont) or as an alternative, with PTFE packing gland seal.
The handle is made of C40 steel with suitable thickness, able to support workloads higher than normal effort for the valve operating; Geomet® treatment that makes it three times more resistant to corrosion compared to normal galvanizing treatments; at the end, it is covered by a thick PVC coating that creates a thermic and electrical isolation and makes the handle more comfortable to grip.
Our valves are conform to European directive RoHS.
BONOMI INDUSTRIES can also supply on demand product in aluminum and in steel.
The combustible gases are divided in families: methane, propane, ethane and butane. BONOMI INDUSTRIES valves are homologated for use of gases belonging to all families. Our valves are also compatible with many other fluids. For more info, contact us.
Each country has its own concept of “drinking water”. In many countries, BONOMI INDUSTRIES valves are suitable for drinking water use, however BONOMI INDUSTRIES has also developed valves in special alloys such as s24, s28, s21, s20, s26 made in DZR brass (CW612N) or S292 and the s242 in “Lead-Free” brass (CW510L) prescribed in certain geographical areas.
Even in this case, the answer depends on the legislation in force in the area in where the valves will be installed. Not all countries prescribe homologations for check valves with water and/or gas use. We have several products approved by certification bodies for both water and gas use, e.g.:
-s84W and k84W are DVGW homologated for gas use and s84W is KTW homologated for drinking water use in Germany;
-s292 is homologated in USA by CSA for drinking water use (California, Vermont and Maryland that require lead free brass use) and gas use in all European Union.
YES. Beyond standard production on catalogue, BONOMI INDUSTRIES has a large experience in customized products. The peculiarity of such products can refer to a marginal detail such as handle color, rather than requiring forges and ad hoc equipment in order to combine more functions in same product. In this context, BONOMI INDUSTRIES supplies important markets such as automotive, marine, heating, pneumatics, mining, water treatment, firefighting, tools machinery construction and many others.
Our company is specialized in ball valve design and manufacturing and throughout the years we have focused investments in optimization of production process and in range variety.
The fact that the material received has passed all tests in BONOMI INDUSTRIES gives an intrinsic guarantee on the product quality, reliability and duration.
Our quality is determined by certified raw material choice, by strict working tolerances, continuous tests for product improvement that, even if simple, aims to great variety of applications with wide range of pressures and temperatures.
BONOMI INDUSTRIES valves are super performing for some applications but they are necessary if reliability throughout time is an important prerogative request.
Some features of our valves:
As manufacturer, BONOMI INDUSTRIES establishes relationships with distributors covering a certain market or geography. They aren’t exclusive, but BONOMI INDUSTRIES offers support to its distributors helping them grow sales and increase brand awareness. In particular cases, it’s possible to create a direct commercial channel but only according to certain terms.
BONOMI INDUSTRIES offers to OEM manufacturers direct collaboration and technical support.
To know BONOMI INDUSTRIES distributors, please contact our offices with your request.
BONOMI INDUSTRIES has grown in the past thirty years to be an important player in the world valve business. The route was not easy and has required major investments in machineries, equipment, logistics, people and a serious commitment to continued improved quality. We are certified to ISO 9001:2008 by Lloyd’s Register and further efforts were made to comply with latest regulations in Europe (PED) and around the world. Along with this, new products are being developed and our catalogue continues to become reacher to help you increase your business and reliability in the valve industry.
Regretfully, there are areas in the world, where business ethic has different values and it is no news that manufacturers in the Far East have copied famous brands. RuB is among those being copied. Copies of BONOMI INDUSTRIES valves have been exhibited at shows and some products were distributed. BONOMI INDUSTRIES has already taken legal actions against manufacturers in the Far East and is currently prosecuting importers of false products.
BONOMI INDUSTRIES owns registered trademarks and logos that will actively and legally protect.
It is also in your own interest, that any information about copies of BONOMI INDUSTRIES valves is brought to our attention with names, dates, etc. It is our firm commitment to fight unfair competition in any possible way and those who will actively show their support to BONOMI INDUSTRIES , will be awarded.
We are worried for our brand awareness but we are much more worried for our customers! If our customers install in their system a valve believing it is produced in Italy while it is in fact produced in the Far East, and this valve is unable to stand pressure or doesn’t meet proper standards of quality, they could put at risk the entire system!
We anticipate our gratitude for your cooperation in this issue, we fight this curse but we need also your help!
RUBINETTERIE UTENSILERIE BONOMI
Board of Directors
As it has already occurred in the past, clones of BONOMI INDUSTRIES valves are being offered on the market once more, nevertheless those are completely unrelated to our company and production range.
We hereby inform you that:
– None of our product lines has been lately discontinued,
– BONOMI INDUSTRIES produces on a regular basis its complete range,
– No change in series designation has been made,
– No production move out of Italy has ever been planned,
– Our products are of 100% Italian origin, produced in our plant in Ciliverghe di Mazzano (BS) Italy with state of the art equipment and processes and going through our unique 100% 24h seal test!
Any letter, fax, e-mail or whatever written or verbal communication released by anyone giving contrary in- formation, is false and we reserve the right to take legal action against it.
We continue producing and dispatching our products in five continents and we ask you to please contact us in case you face any trouble in sourcing our products through your traditional channels. Through the years BONOMI INDUSTRIES improved the service and shortened lead times for direct shipments from Italy; an extensive network of professional distributors has been built to meet local stringent requirements.
A complete overview of our production range can be seen in our official website: https://www.rubvalves.com
Valves with design SIMILAR to BONOMI INDUSTRIES may not assure you the performances you are used to, that are granted through the years of experience and continuous improvement. Quality of ball valves depends upon engineering, extensive testing, choice of materials, tight tolerances, cleanliness, reliable inline tests.
Obviously, BONOMI INDUSTRIES cannot be held responsible for damages caused by products which are not made by BONOMI INDUSTRIES ! In the attachment you can find a few tips to visually recognize the true BONOMI INDUSTRIES products, despite other valves may have similar levers and/or similar body design.