This ball valve with built-in vertical filter allows a large flow rate with a low pressure drop and supports a maximum pressure of 30 bar (PN).
This innovative product avoids the installation of two ball valves, before and after the filter. Quick and easy assembly, maintenance and cleaning.

Technical Info

  • Substitutes 3 different components (2 ball valves and one filter)
  • Reduces leakage risks due to lower sealing points
  • Cost saving due to reduced number of components
  • Time saving at installation and maintenance
  • Built-in vertical filter with cartridge structure in 1.4301 / AISI304 + Nylon (filtration degree: 500 microns / 35 mesh).
  • Final test conforming with UNI EN 12266-1 points A3 / A4 (for 1 ½” and 2” sizes: acc. to directive 2014/68/UE)
  • No metal-to-metal moving parts
  • Handle clearly shows ball position
  • Chrome plated brass ball for longer life
  • Handle stop on body to avoid stress at stem
  • Nominal port
  • Hot forged sand blasted, external nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Finest brass according to EN 12165 and EN 12164 specifications
  • Bottom plug for an easy filter maintenance
  • Zinc plated steel handle with plastic cover
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Blowout-proof unplated brass stem
  • Two O-rings at the stem (FKM + NBR) for maximum safety
  • 30 bar (450 PSI) non-shock cold working pressure for sizes 3/4” to 1”, 20 bar (290 PSI) for sizes 1 ¼” to 2” • -20°C to +100°C (-4°F to +212°F)
  • Valve conforming with directive 2014/68/EU
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Pure PTFE seats
  • T-handle for ½” to 1” sizes
  • ISO 228/1 parallel female by female threads
  • According to 2014/68/UE, 1 ¼” and superior sizes cannot be used with dangerous fluids
  • Water Regulations Advisory Scheme (United Kingdom)

NOTE: approvals apply to specific configurations/sizes only.

Part description Quantity Part Material
Nickel plated body
1
CW617N
End connection
1
CW617N
Seals
2
PTFE
Stem
1
CW614N
Chrome plated ball
1
CW617N
O-Ring
1
NBR
O-Ring
1
FKM
Filter
1
1.4301 / AISI304 + Nylon
Filter
1
1.4301 / AISI304 + Nylon
Flat seal
1
NBR

Suitable for dangerous fluids, in compliance with DIRECTIVE 2014/68/EU Group 1 fluids      

Pressure - temperature chart
Pressure drop chart

Technical material

Document

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCE190M
-
4266

To view all available technical material
Register as a client