s.7600L 3-way, lever, 2 seats, L-port (diverting)

Richiedi info

1/2″ – 1″ EN 10226-1

The RuB s.7600L is the right choice for fluid diversion and is designed with robust maintenance-free components ensuring ease of operation and safety. With a simple 90° turn, you can divert flow from one downstream outlet to the other.
It combines traditional manual operation with modern automation. It is also very easy to convert from its sturdy lever handle to ISO 5211 actuator flange assembly.
It features low operating torque and a special wear reducing self-compensating
valve seat design that meets our 100,000 cycle life test requirement. The valve can be purchased separately, with handle or with a RuB actuator already mounted.

Informazioni tecniche
Quality
  • Electronic 100% seal test guaranteed for maximum safety
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Silicone-free lubricant on all seals
  • Chrome plated brass ball for longer life
  • Each valve is seal tested for maximum safety
  • Performs well in any orientation
  • Strong configuration
Body
  • Hot forged sand blasted, external nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Integrated ISO5211 / DIN3337 mounting flange for universal connection to actuator
  • Finest brass according to EN 12165 and EN 12164 specifications
  • 3-way L-port design for flow diversion
Stem
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double O-rings at the stem for maximum safety
Sealing
  • Reinforced PTFE self-lubricating seats with flexible-lip and wear compensation design
Threads
  • EN 10226-1, ISO 228 parallel female by female threads
Flow
  • 100% full port for maximum flow
Handle
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • Handle removable with valve in service
  • WARNING: do not exceed reasonable temperature and/or electrical load

 

Working pressure & temperature
  • 30 bar (450PSI) non-shock cold working pressure
  • -20°C to +170°C (-4°F to +350°F)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
Options
  • Rack and pinion pneumatic actuator (spring return or double acting)
  • Compact Power electric actuator
  • Female by female NPT threads
  • ISO 7/1, BS 21 BSPT taper female threads
  • S.7600 without handle, actuator ready
  • Various actuator linkage kit
Upon request
  • Custom design
  • Stainless steel stem (1.4401/ AISI 316)
  • Configurations with 4 seats, L-port (s.7200L) or T-port (s.7300L)
PED directive
  • The product meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking.
Approved by or in compliance with
  • RoHS Compliant (EU)
  • EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)

NOTE: approvals apply to specific configurations/sizes only.

Part descriptionQ.tyMaterial
1Nickel plated body (External nickel plated, unplated inside)1CW617N
2Seat2PTFE graphite filled 15%
3Chrome plated ball1CW617N
4Sand blasted nickel plated end cap (External nickel plated, unplated inside)1CW617N
5Washer1PTFE carbon filled 25%
6Nickel plated stem O-ring design1CW617N
7O-Ring2FPM
8O-Ring2FPM
9Geomet® plated steel handle1DD11 (EN10111)
10Black dipped coating1PVC
11Stainless steel screw11.4301 / AISI304
12Unplated stop1CW617N
13Zinc plated steel nut1Class 8 (UNI7474)
Torque correction factors

Valve torque can vary according to operating frequency, temperature and friction characteristics of the media.
If media has more or less friction than water, multiply torque by the following factors.

Lubricating oils or liquids  0.8
Dry gases, natural gas 1.5
Slurries or liquids bearing abrasive particles 1.5÷2.5

 

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES7600L - 4266