Technical Info

  • Chrome plated brass ball for longer life
  • Plain outlet
  • Hot forged sand blasted nickel plated brass body
  • Angle pattern ball bib-cock
  • Copper alloy brass according to EN 12165 and EN 12164 specifications
  • Enameled red steel handle
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Handle removable with valve in service
  • Blowout-proof brass stem
  • Maintenance-free, double O-rings (FPM and NBR) at the stem for maximum safety
  • 15 bar non-shock cold working pressure
  • -20°C to +80°C (-4°F to +175°F)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Pure PTFE seats
  • Configuration from 3/8″ up to 1″ with hose (s.142)
  • UNI ISO 228 male inlet thread
  • The product meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking
  • GOST-R (Russia)
  • EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)

NOTE: approvals apply to specific configurations/sizes only.

Part description Quantity Part Material
Nickel plated body
1
CW617N
Seat
2
PTFE
Chrome plated ball
1
CW614N
Nickel plated end-cap
1
CW617N
Stem O-Ring design
1
CW617N
O-Ring
1
FPM
O-Ring
1
NBR
Screw
1
Steel
Enameled red handle
1
Steel
Infuser
1
Vestolen

Technical material

Document

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCE140
-
4266

To view all available technical material
Register as a client