s.142 bib-cock

Info request

3/8″ – 1″ hot forged brass
with 3/4″ outlet and hose

Technical Data
Quality
  • Chrome plated brass ball for longer life
Body
  • Hot forged sand blasted nickel plated brass body
  • Angle pattern ball bib-cock with hose fitting
  • Copper alloy brass according to EN 12165 and EN 12164 specifications
Stem

• Maintenance free, thanks to two O-rings (FPM and NBR) at the stem for maximum safety

Sealing
  • Pure PTFE seats
Threads
  • UNI ISO 228 male inlet thread
  • 3/4″ threaded outlet complete with hose

Handle
  • Enameled red steel handle
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Handle removable with valve in service
Working pressure & temperature
  • 15 Bar up to 3/4″, 12 Bar 1″ non-shock cold working pressure
  • -20°C/ +80°C
  • WARNING: freezing of the fluid in the installation may severely damage the valve
Options
  • Configuration 1/2″ or 3/4″ with plain outlet (s.140)
PED directive
  • The product meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking
Approved by or in compliance with
  • GOST-R (Russia)

 

NOTE: approvals apply to specific configurations/sizes only.

Part descriptionQ.tyMaterial
1Nickel plated body1CW617N
2Seat2PTFE
3Chrome plated ball1CW614N
4Nickel plated end-cap1CW617N
5Stem O-Ring design1CW614N
6O-Ring1FPM
7O-Ring1NBR
8Screw1Steel
9Enameled red handle1Steel
10Washer1PVC rubber
11Nickel plated nut1CW617N
12Nickel plated hose1CW617N
13Infuser1Vestolen
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCE142 - 4163