s.39 high pressure

Info request

micro 1/8” – 1/4" & mini 1/4" – 3/4"
hot forged brass ball valve

Technical Data
Quality

• Dual sealing system allows valve to be operated in either direction making installation easier
• No metal-to-metal moving parts
• No maintenance ever required
• Silicone-free lubricant on all seals
• Chrome plated brass ball for longer life
• Each valve is seal tested for maximum safety
• Handle stops on body to avoid stresses at stem
• Handle/ stem clearly shows ball position

Body

• Hot forged sand blasted brass body with extremely compact design (mini configuration only)
• Finest brass according to EN 12165 specification

Stem

• Blowout-proof brass stem with FPM O-ring

Sealing

• Pure PTFE self-lubricating seats with flexible-lip design

Threads

• ISO 228 parallel female by female threads

Handle
  •  Reinforced nylon black wedge handle
  •  WARNING: do not exceed reasonable temperature and/or electrical load
  • Removable with valve in service
Working pressure & temperature

• 60 bar (900 PSI) micro configuration, 30 Bar (450 PSI) mini configuration non-shock cold working pressure
• -20°C (-4°F)/ +90°C (+200°F)
• +120°C (+250°F) metal wedge handle (mini configuration only)
WARNING: freezing of the fluid in the installation may severely damage the valve

Options

• Male by female threads
• Nylon wedge handle yellow, red or blue
• Metal wedge handle available in colours red, black, yellow, green, light blue, chrome plated (mini only)
• NPT taper ANSI B.1.20.1 threads

Upon request

• ISO 7/1 BSPT taper threads
• Dezincification resistant brass CW602N
• Additional connection options
• Screw driver or wrench operated

PED directive

• The product meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking

Approved by or in compliance with

• RoHS Compliant (EU)

 

NOTE: approvals apply to specific configurations/sizes only.

Part descriptionQ.tyMaterial
1Nickel plated body (external nickel plated, unplated inside)1CW617N
2Retainer nut1CW617N
3Retainer seat1PTFE
4Chrome plated ball1CW617N
5Body seat1PTFE
6O-Ring 1HNBR
7Nickel plated end cap (external nickel plated, unplated inside)1CW617N
8Unplated stem1CW617N
9O-Ring1FPM
10Zinc plated screw1C10C
11Black handle1Nylon glass filled 30%

DN shows the nominal flow diameter.

Pressure-temperature chart
Pressure drop chart (MINI configuration)
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES39