s.468 DZR and LF compression ends

Info request

full port 22 mm dezincification-resistant and lead free
hot forged ball valve for actuation

Technical Data
  • 100% seal test guaranteed
  • Arrow on the valve body clearly shows the flow direction
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Stem clearly shows ball position
  • Silicone-free lubricant on all seals
  • Chrome plated DZR and lead free brass ball for longer life and with anti-freeze function
  • Hot forged sand blasted DZR and lead free unplated body and cap sealed with Loctite® or equivalent thread sealant
  • Dezincification-resistant and lead free brass in compliance with HCACL Hygienic copper alloy composition (UBA list)
  • Two EPDM O-rings at the stem for maximum safety
  • Blowout-proof unplated DZR and lead free brass stem
  • EPDM seats for lower torque
  • Compression ends to EN 1254-2
  • Full port to DIN 3357 for maximum flow
  • Integrated sturdy ISO 5211 flange allows direct mounting of electric and pneumatic actuators, with no bracket or coupling required. See RuB line of electric and pneumatic actuators.
Working pressure & temperature
  • Shell rating: 40 Bar (600 PSI) non-shock cold working pressure
  • Seat rating/compression ends: 16 Bar max (230 PSI max) non-shock cold working pressure (see chart for pressure/temperature limits)
  • -20°C (-4°F)/+120°C (+250°F)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • S.468 DZR and lead free 7/8″ compression ends
  • Rack and pinion pneumatic actuator (spring return or double acting)
  • Compact power electric actuator
  • Manual lockable handle
Upon request
  • Custom design
PED directive
  • The product described in this document meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking
Approved by or in compliance with
  • Water Regulations Advisory Scheme (United Kingdom)
  • Certified by CSA International for Drinking Water to NSF/ANSI 372 (USA)


NOTE: approvals apply to specific configurations/sizes only.

Part descriptionQ.tyMaterial
1Unplated body1CW511L
3Chrome plated ball1CW511L
4Unplated end-cap1CW511L
5Unplated stem1CW511L
7Washer1PTFE carbon filled 25%
9Unplated nut2CW617N

DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.

Torque for actuator sizing N.m
Pressure-temperature chart
Pressure drop chart
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES468 - 3992