s.90 union connection

Info request

full port 1/2″-1.1/4″
hot forged brass ball valve

Technical Data
Quality
  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • T-handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Chrome plated brass ball for longer life
  • Handle stops on body to avoid stress at stem
Body
  • Hot forged sand blasted, external nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Finest brass according to EN 12165 and EN 12164 specifications
Stem
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
Sealing
  • Pure PTFE self-lubricating seats with flexible-lip design
Threads
  • ISO 228 female by union male threads

Flow
  • Full port to DIN 3357 for maximum flow
Handle
  • Aluminum T-handle up to 1″, Geomet® carbon steel T-handle with thick PVC  dip coating over 1″
  • Handle removable with valve in service
Working pressure & temperature
  • 40 Bar (600 PSI)  non-shock cold working pressure
  • -40°C (-40°F) / +150°C (+302°F)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
Options
  • Stem extension
  • Oval lockable handle
  • AISI 430 stainless steel handle
  • Patented locking device
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • Stubby handle
  • RuB memory stop is designed to be installed with our stubby handle
Upon request
  • AISI 316 stainless steel ball
  • Glass filled PTFE seals
  • Custom design
PED directive
  • According to 2014/68/UE module A: it cannot be used with dangerous gases in sizes larger than 25mm
Approved by or in compliance with
  • GOST-R (Russia)
  • EAC – Declaration of conformity (Russia-Kazakhstan-Belarus)
  • RoHS Compliant (EU)

NOTE: approvals apply to specific configurations/sizes only.

1.1/4″ hollow ball

Part descriptionQ.tyMaterial
1Nickel plated body (external nickel plated, unplated inside)1CW617N
2Seat2PTFE
3Chrome plated ball1CW617N
4Nickel plated end-cap (external nickel plated excluding male thread, unplated inside)1CW617N
5Nickel plated stem O-ring design1CW617N
6Geomet® nut1CB4FF
7O-Ring2FPM
8Red T-handle1Aluminum
9Red PVC coated Geomet® steel T-handle1DD11
10O-Ring1EPDM
11Nickel plated nut1CW617N
12Nickel plated hose1CW617N

DN shower the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.
Ball valves are marked CE on body 1.1/4″ size as follow:

CE XXCODEXX Cat. I-A

Pressure-temperature chart
Pressure drop chart
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES9036 - 4163