Document
Technical Info
- 24h 100% seal test guaranteed
- Dual sealing system allows valve to be operated in either direction making installation easier
- No metal-to-metal moving parts
- No maintenance ever required
- Handle clearly shows ball position
- Silicone-free lubricant on all seals
- Chrome plated brass ball for longer life
- Handle stops on body to avoid stress at stem
- Full port to DIN 3357 for maximum flow
- Hot forged sand blasted, nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
- Finest brass according to EN 12165 and EN 12164 specifications
- Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
- WARNING: do not exceed reasonable temperature and/or electrical load
- Handle removable with valve in service
- Blowout-proof nickel plated brass stem
- Maintenance-free, double FPM O-rings at the stem for maximum safety
- 600 PSI (40 bar) up to 2″, 450 PSI (30 bar) over 2″ non-shock cold working pressure
- 250 PSI (17 bar) non-shock working pressure for LP-Gas
- -40°F to +350°F (-40°C to +170°C)
- WARNING: freezing of the fluid in the installation may severely damage the valve
- Pure PTFE self-lubricating seats with flexible-lip design
- Stem extension
- T-handle
- Stainless steel handle (1.4016/AISI 430)
- Oval lockable handle up to 2″, round over 2″
- Patented locking device for valves up to 4″
- Stubby handle
- RuB memory stop designed to be installed with our stubby handle
- NPT taper ANSI B.1.20.1 female by female threads
- Stainless steel ball (1.4401 / AISI 316)
- Glass filled PTFE seals
- Custom design
- Special configuration for industrial oxygen application
- Canadian standards Association (United States, Canada)
- Factory Mutual (United States)
- GOST-R (Russia)
- RoHS Compliant (EU)
- Underwriters Laboratories (United States, Canada): – Guide YSDT: LP-Gas shut-off valve – Guide YRBX: Flammable liquid shut-off valve – Guide YRPV: Gas shut-off valve for use with natural and manufactured gases – Guide MHKZ: No. 6 oil at 250°F
NOTE: approvals apply to specific configurations/sizes only.
Part description | Quantity | Part Material |
---|---|---|
Nickel plated NPT body
|
1
|
CW617N
|
Seat
|
2
|
PTFE
|
Chrome plated ball
|
1
|
CW617N
|
Nickel plated NPT end-cap
|
1
|
CW617N
|
Nickel plated stem O-ring design
|
1
|
CW617N
|
Geomet® nut
|
1
|
CB4FF (EN10263-2)
|
O-Ring
|
2
|
FPM
|
Yellow PVC coated Geomet® steel handle
|
1
|
DD11 (EN10111)
|
Technical material
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES95N
-
4711
To view all available technical material
Register as a client