Puri T.292

Запрос информации

full port 1/4″ — 2″
hot forged lead free brass ball valve

All surfaces of this product in contact with drinking water contain less than 0.25% of lead in compliance with U.S. law

 

технические данные
Quality
  • Certified by CSA International to comply with U.S. s3874, California AB1953, and similar laws of other states for the safe handling of drinking water
  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Handle stops on body to avoid stress at stem
Body
  • Hot forged sand blasted, unplated lead free brass body and cap sealed with Loctite® or equivalent thread sealant
  • Chrome plated lead free brass ball for longer life
Stem
  • Pure PTFE adjustable packing gland and reinforced washer for lower torque and easy maintenance
  • Blowout-proof unplated lead free brass stem
Sealing
  • Glass filled pure PTFE self-lubricating seats with flexible-lip design
Threads
  • NPT taper ANSI B.1.20.1 female by female threads

Flow
  • Full port to DIN 3357 for maximum flow
Handle
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both Thermal and electrical protectio
  • WARNING: do not exceed reasonable temperature and/or electrical load
Working pressure & temperature
  • 600 PSI non-shock cold working pressure
  • For general use: -40°F / +350°F
  • NSF 61 limits (CSA approval): tested for use in continuous exposure to water of ambient temperature
  • WARNING: freezing of the fluid in the installation may severely damage the valve
Options
  • Stem extension
  • T-handle
  • Oval lockable handle
  • AISI 430 stainless steel handle
  • Patented locking device
  • Stubby handle
Upon request
  • Custom design
  • Pure PTFE seals
Approved by or in compliance with
  • GOST-R (Russia)
  • Certified by CSA International for Drinking Water to
    NSF/ANSI 61 – NSF/ANSI 372 (USA)
  • RoHS Compliant (EU)

 

NOTE: approvals apply to specific configurations/sizes only.

1.1/2″-2″ hollow ball

Part descriptionQ.tyMaterial
1Unplated NPT body1CW510L
2Seat2PTFE glass filled 5-15%
3Chrome plated ball1CW510L
4Unplated NPT end-cap1CW510L
5Unplated stem packing gland design1CW510L
6Nickel plated gland nut1CW617N
7Geomet® nut1CB4FF
8Packing gland seal1PTFE
9Thrust washer1PTFE carbon filled 25%
10Green PVC coated Geomet® steel handle1DD11

DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.

Pressure-temperature chart

for general use

Pressure drop chart
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCET292 - 4163