• 24h 100% seal test guaranteed
• Dual sealing system allows valve to be operated in either direction making installation easier
• No metal-to-metal moving parts
• No maintenance ever required
• Handle clearly shows ball position
• Silicone-free lubricant on all seals
• Chrome plated DZR brass ball for longer life
• Handle stops on body to avoid stress at stem

• Full port to DIN 3357 for maximum flow

• Hot forged sand blasted DZR unplated body and cap sealed with Loctite® or equivalent thread sealant
• Dezincification resistant ADZ-T and ADZ-P brass approved to SBN-PFS 1983:2 and NR-BFS 1988:18 specifications

• Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
• Handle removable with valve in service
• WARNING: do not exceed reasonable temperature and/or electrical load

• Maintenance-free, double FPM O-rings at the stem for maximum safety
• Blowout-proof unplated DZR brass stem

• 30 bar (450 PSI) non-shock cold working pressure
• -40°C to +170°C (-40°F to +350°F)
• WARNING: freezing of the fluid in the installation may severely damage the valve

• Pure PTFE self-lubricating seats with flexible-lip design

• CW617N brass body and components
• T-handle
• Oval lockable handle
• Stainless steel handle (1.4016 / AISI 430)
• Patented locking device
• Brass stem extension
• Male by female threads for sizes 1/2″, 3/4″ and 1″
• Stubby handle
• RuB memory stop designed to be installed with our stubby handle

• ISO 228 parallel female by female threads

• Stainless steel ball (1.4401 /AISI 316)
• Glass filled PTFE seals
• Custom design
• Male by female threads

• According to 2014/68/UE module A: it cannot be used with dangerous gases in sizes larger than 25mm

• KIWA Regulation 4 a.k.a. KUKreg4 (United Kingdom)
• GOST-R (Russia)
• EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)
• RoHS Compliant (EU)

  NOTE: approvals apply to specific configurations/sizes only.