Several governmental authorities recommend use of special alloys for valves handling water in areas where there is a problem of dezincification.

RuB DZR valves are designed to meet such requirements. Through the use of new technology these valves retain the reliability and competitiveness of brass, but are comparable to bronze in corrosion resistance.

Be kind with yourself, make sure the valve that brings you pure fresh water is an RuB DZR valve.

Ri.se. / Boverket

Technical Info

  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Handle stops on body to avoid stress at stem
  • Chrome plated DZR brass ball for longer life
  • Full port to DIN 3357 for maximum flow
  • Hot forged sand blasted DZR unplated body and cap sealed with Loctite® or equivalent thread sealant
  • Dezincification resistant ADZ-T and ADZ-P brass approved to SBN-PFS 1983:2 and NR-BFS 1988:18 specifications
  • Extended stem forged in one piece with body allows perfect sealing and easy operation when valve is isolated
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • Handle removable with valve in service
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
  • Unplated DZR brass stem
  • 16 bar (230 PSI) non-shock cold working pressure
  • -20°C to +120°C (-4°F to +250°F)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Pure PTFE self-lubricating seats with flexible-lip design
  • T-handle
  • Oval lockable handle
  • Stainless steel handle (1.4016 / AISI 430)
  • Patented locking device
  • Short stem design
  • Stubby handle
  • RuB memory stop designed to be installed with our stubby handle
  • Compression ends to EN 1254-2 and NKB no.12
  • Stainless steel ball (1.4401 / AISI 316)
  • Glass filled PTFE seals
  • Custom design
  • The product described in this document meets the requirements of the PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking; it cannot be used with dangerous gases in sizes larger than 25 mm
  • Kiwa-Swedcert (Sweden)
  • GOST-R (Russia)
  • RoHS Compliant (EU)

NOTE: approvals apply to specific configurations/sizes only.

Hollow ball for D 35-42-54

Part description Quantity Part Material
Unplated body
1
CW602N
Ball seat
2
PTFE
Chrome plated ball
1
CW602N
Unplated end-cap
1
CW602N
Olive
2
CW603N - CW508L - CW602N
Unplated nut
2
CW617N
Unplated extended stem O-ring design
1
CW602N
O-Ring
2
FPM
Unplated nut
1
CW617N
Geomet® nut
1
CB4FF (EN10263-2)

DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.

Pressure-temperature chart
Pressure drop chart

Technical material

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCES30
-
4797

To view all available technical material
Register as a client