s.7200L 3-way 4 seats L-port (diverting)

Запрос информации

full port 1/2″ — 1″
hot forged brass ball valve

The RuB S.7200L is the right choice for fluid diversion and is designed with robust maintenance-free components ensuring ease of operation and safety. With a simple 90° turn of the handle, you can divert flow from one downstream outlet to the other. It combines traditional manual operation with modern automation.It is also very easy to convert from its sturdy lever handle to ISO 5211 actuator flange assembly.The valve can be purchased separately, with handle or with a RuB actuator already mounted.

технические данные
Quality
  • Electronic 100% seal test guaranteed
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Silicone-free lubricant on all seals
  • Chrome plated brass ball for longer life
  • Each valve is seal tested for maximum safety
  • Performs well in any orientation
  • Strong configuration
Body
  • Hot forged sand blasted, nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
  •  Integrated ISO5211 / DIN3337 mounting flange for universal connection to actuator
  •  Finest brass according to EN 12165 and EN 12164 specifications
  •  3-way L port design for flow diversion
Stem
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
Sealing
  • Pure PTFE self-lubricating seats with flexible-lip design
  • Four seats design for mixing of various fluids in the system
Threads
  • EN10226-1/ISO228 parallel female threads
Flow
  • 100% full port for maximum flow
Handle
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  •  Handle removable with valve in service
  •  WARNING: do not exceed reasonable temperature and/or electrical load
Working pressure & temperature
  •  20 bar (300 PSI) non-shock cold working pressure
  •  -20°C (-4°F) / +150°C (+302°F)
  •  WARNING: freezing of the fluid in the installation may severely damage the valve
Options
  • Rack and pinion pneumatic actuator (spring return or double acting)
  •  NPT taper ANSI B.1.20.1 female threads
  •  S.7200 without handle actuator ready
  •  Various actuator linkage kit
Upon request
  • Custom design
  •  Stainless steel stem
  •  Configurations with 4 seats & T-port (s.7300L) or 2 seats & L-port (s.7600L)
PED directive
  • The product meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking
Approved by or in compliance with
  • RoHS Compliant (EU)
  • EAC — Declaration of conformity (Russia-Kazakhstan-Belarus)

 

NOTE: approvals apply to specific configurations/sizes only.

Part descriptionQ.tyMaterial
1Sand blasted nickel plated body1CW617N
2Seat2PTFE
3Seat2PTFE
4Chrome plated ball1CW617N
5Sand blasted nickel plated end-cap1CW617N
6Washer1PTFE carbon filled 25%
7Nickel plated stem O-ring design1CW617N
8O-Ring2FPM
9Screw handle stop1CW617N
10Spring1AISI 302
11Unplated spring bushing1CW617N
12Stainless steel screw1AISI 304
13Geomet® plated steel handle1DD11
14Black dipped coating1PVC
Torque for actuator sizing N.m
Torque correction factors

Valve torque can vary according to operating frequency, temperature and friction characteristics of the media.
If media has more or less friction than water, multiply torque by the following factors.

Lubricating oils or liquids 0.8
Dry gases, natural gas 1.5
Slurries or liquids bearing abrasive particles 1.5÷2.5
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES7200L - 4187