s.82 NPT side drain

Запрос информации

full port 1/2″- 2″
hot forged brass ball valve

технические данные
Quality
  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Handle stops on body to avoid stress at stem
  • Chrome plated brass ball for longer life
Body
  • Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Side drain allows easy and safe downstream line venting
  • Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications
Stem
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
Sealing
  • Pure PTFE self-lubricating seats with flexible-lip design
Threads
  • NPT  taper ANSI B.1.20.1 female by female threads
  • 1/4″ NPT side tap

Flow
  • Full port to DIN 3357 for maximum flow
Handle
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Handle removable with valve in service
Working pressure & temperature
  • 600 PSI non-shock cold working pressure
  • -40°F/+350°F
  • WARNING: freezing of the fluid in the installation may severely damage the valve
Options
  • Stem extension
  • T-handle
  • Oval lockable handle
  • AISI 430 stainless steel handle
  • Patented locking device
  • Stubby handle
  • RuB memory stop designed to be installed with our stubby handle
Upon request
  • AISI 316 stainless steel ball and/or stem
  • Glass filled PTFE seals
  • Custom design
  • Dual side drain port
Approved by or in compliance with
  • Canadian standards Association (United States, Canada)
  • GOST-R (Russia)
  • RoHS Compliant (EU)
  • Underwriters Laboratories (United States & Canada)

 

NOTE: approvals apply to specific configurations/sizes only.

1.1/4″-2″ hollow ball

Part descriptionQ.tyMaterial
1Unplated body1CW617N
2Seat2PTFE
3Chrome plated ball1CW617N
4Unplated end-cap1CW617N
5Nickel plated stem O-ring design1CW617N
6Geomet® nut1CB4FF
7O-Ring2FPM
8Yellow PVC coated Geomet® steel handle1DD11
9Unplated plug1CW617N

DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.

Pressure-temperature chart
Pressure drop chart
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES82 - 4163