Legionella is a bacterium that lives and proliferates in natural and artificial aquatic environments at temperatures ranging between 5.7°C and 55°C and standing up to acidic and alkaline environments.
New s.84AW is approved for use with drinking water; the specific ball design avoids water stagnation and the spread of bacteria in the system.

Technical Info

  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • The valve is provided with a flat sealing surface at male thread that offers an improved performance compared to conventional connections; a wider seal surface guarantees higher sealing, reliable over time
  • No metal-to-metal moving parts
  • No maintenance ever required
  • T-handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Handle stops on body to avoid stress at stem
  • Chrome plated brass ball with rinse hole
  • Full port to DIN 3357 for maximum flow
  • Hot forged sand blasted, external nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Finest brass according to EN 12165 and EN 12164 specifications
  • Aluminum T-handle enameled green or red
  • T-handle removable with valve in service
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double EPDM O-rings at the stem for maximum safety
  • 40 bar (600 PSI) non-shock cold working pressure
  • DIN-EN 13828 limitations for potable water: 10 bar (Kg/cm²) non-shock cold working pressure and +65°C temperature (occasional excursions up to 90°C are permitted for a period of 1 h maximum)
  • -40°C to +150°C (-40°F to +302°F)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Pure PTFE self-lubricating seats with flexible-lip design
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • Patented locking device
  • EN10226-1 parallel female by female threads and taper male by parallel female threads (s.84W model)
  • Stubby handle
  • RuB memory stop designed to be installed with our stubby handle
  • EN 10226-1, ISO228 parallel female by ISO228 male threads
  • Stem extension
  • Stainless steel ball (1.4401 / AISI 316)
  • Glass filled PTFE seals
  • Custom design
  • The product meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking
  • DVGW (Germany)
  • GOST-R (Russia)
  • EAC – Declaration of conformity (Russia, Kazakhstan, Belarus)
  • RoHS Compliant (EU)
  • Attestation de Conformité Sanitaire (France)

NOTE: approvals apply to specific configurations/sizes only

Part description Quantity Part Material
Nickel plated body (external nickel plated, unplated inside)
1
CW617N
Seat
2
PTFE
Chrome plated ball with rinse hole
1
CW617N
Nickel plated male end-cap (external nickel plated, unplated inside)
1
CW617N
Nickel plated stem O-ring design
1
CW617N
Geomet® nut
1
CB4FF (EN10263-2)
O-Ring
2
EPDM
Green or red T-handle
1
EN AC-46100

DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.

Pressure-temperature chart
Pressure drop chart

Technical material

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.

XCES84AW
-
4266

To view all available technical material
Register as a client