• 24h 100% seal test guaranteed
• Dual sealing system allows valve to be operated in either direction making installation easier
• No metal-to-metal moving parts
• No maintenance ever required
• Handle clearly shows ball position
• Silicone-free lubricant on all seals
• Chrome plated brass ball for longer life
• Handle stops on body to avoid stress at stem

• One size reduced port compact design

• Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
• Finest brass according to EN 12165 and EN 12164 specifications

• Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
• Handle removable with valve in service
• WARNING: do not exceed reasonable temperature and/or electrical load

• Blowout-proof nickel plated brass stem
• Maintenance- free, double FPM O-rings at the stem for maximum safety

• 40 bar (600 PSI) non-shock cold working pressure
• -40°C to +170°C (-40°F to +350°F)
• WARNING: freezing of the fluid in the installation may severely damage the valve

• Pure PTFE self-lubricating seats with flexible-lip design

• NPT taper ANSI B.1.20.1 threads (s. 71 model with packing gland seal)
• Stem extension
• T-handle
• Oval lockable handle
• Stainless steel handle (1.4016 / AISI 430)
• Patented locking device
• Stubby handle
• RuB memory stop designed to be installed with our stubby handle

• ISO 7/1, BS 21 BSPT taper female by female threads

• Stainless steel ball (1.4401 / AISI 316)
• Glass filled PTFE seals
• Custom Design
• Male by female threads

• According to 2014/68/UE module A: it cannot be used with dangerous gases in sizes larger than 25 mm

• GOST-R (Russia)
• RoHS Compliant (EU)

NOTE: approvals apply to specific configurations/sizes only